Turbo Infrared Sauna is strictly designed for the use of dry sauna .
It is perfect for a standard bathtub enclosure or small closet. In this installation instruction, we show you how to install it in the standard size bathtub of 60” long x 28” deep.
Turbo Infrared Sauna Unit comes with:
- a canvas awning/cover
- a platform
What You Will Need To Provide Yourself are:
- 2 tension rods such as Zenith 505S 72 TwistTight Tension Shower Rod adjustable 72″ available at Sears, Bed Bath & Beyond, etc.
- 3 light bulbs: 3 Phillips 250W Red Heat lights (Infrared). Available at Home Depot
Safety Warning
Before plugging in the Infrared Sauna check to make sure the outlet you are going to use is a “GFCI” (Ground Fault Circuit Interrupter) type and labeled as shown in the adjacent photo. If not you must purchase a GFCI adapter before using the Sauna. They are available at Home Depot along with the Infrared Bulbs.
Infrared Bulb Installation
Tools required for assembly:
- #3 Phillips head screwdriver
(WE WILL NOT SHIP THE UNIT WITH THE LIGHT BULBS DUE TO POSSIBLE DAMAGE DURING SHIPPING.)
Canvas Awning/Cover Installation
(1) Insert the first shower curtain rod into one sleeve of the awning.
(2) Install the first shower curtain rod as close to the wall of the bathtub enclosure as possible, at about 5 ft high from the bathtub floor. Secure the rod so it stays on the wall firmly. Be sure the flap is facing down.
(3) Insert the second shower curtain rod into the other sleeve of the awning.
(4)-(6) Install the rod to the wall securely as shown in steps (5)-(7).
(7) Bring the flaps of each side down.
(8) Make sure there is no gap between each flap and the wall of the bathtub enclosure.
(9) Install platform and Turbo Infrared Sauna as shown. It is now ready to use. When ready to use, close the shower curtain.Enjoy!!
